DE-SOLV-IT CLEAN AWAY APC SUPER CONCENTRATE
TECHNICAL PRODUCT BULLETIN #SW-49
USEPA, OEM REGULATIONS IMPLEMENTATION DIVISION
ORIGINAL LISTING DATE: NOVEMBER 10, 2010
“DE-SOLV-IT CLEAN AWAY APC SUPER CONCENTRATE”
| I. NAME, BRAND, OR TRADEMARK |
|---|
| DE-SOLV-IT CLEAN AWAY APC SUPER CONCENTRATE Type of Product: Surface Washing Agent |
| II. NAME, ADDRESS, AND TELEPHONE NUMBER OF MANUFACTURER/CONTACT |
|---|
| Orange-Sol Blending and Packaging 1400 N Fiesta Boulevard Gilbert, AZ 85233 Phone: (800) 877-7771 Fax: (480) 497-0444 E-mail: updated information required Web Site: https://www.orange-sol.com (Mr. Albert Farnsworth) (Mr. Jack Farnsworth at (480) 319-0141) |
| III. NAME, ADDRESS, AND TELEPHONE NUMBER OF PRIMARY DISTRIBUTORS |
|---|
| Bell Tech Master Distributor P.O. Box 2198 Valdez, AK 99686 Phone: (907) 602-0111 Fax: (907) 835-4535 E-mail: bellenterprise@cvinternet.net (Mr. Randy Bell) |
| IV. SPECIAL HANDLING AND WORKER PRECAUTIONS FOR STORAGE AND FIELD APPLICATION |
|---|
| 1. Flammability: Non-combustible 2. Ventilation: No special requirements 3. Skin and eye contact; protective clothing; treatment in case of contact: No special equipment of clothing required; however, goggles are recommended where splash is potential. If eye or skin irritation occurs, flush with ample fresh water. 4.a. Maximum storage temperature: 210°F 4.b. Minimum storage temperature: 34°F 4.c. Optimum storage temperature range: 55°F to 90°F 4.d. Temperatures of phase separations and chemical changes: There are no known phase separations, chemical changes, or other altercations that will change the effectiveness of the product. |
| V. SHELF LIFE |
|---|
| Two (2) years in sealed drums or totes (as delivered). |
| VI. RECOMMENDED APPLICATION PROCEDURE |
|---|
| 1. Application Method: DE-SOLV-IT CLEAN AWAY APC SUPER CONCENTRATE can be used on all oil coated surfaces including sand and rocks through a detergency mechanism. Product should be used with handheld sprayers or for larger applications applied with truck mounted sprayers. Remove contamination with DE-SOLV-IT CLEAN AWAY APC SUPER CONCENTRATE, followed by a rinse. 2. Concentration/Application Rate: For oil spill removal and heavy duty cleaning, dilute product with water using a 1:1 ratio. 3. Conditions for Use: DE-SOLV-IT CLEAN AWAY APC SUPER CONCENTRATE can be used in salt or fresh water, with no limitations as to usage within the optimum temperature parameters (application may be made at or above 35°F, with optimum above 48°F). Cleaning of oil soaked areas should be done in a contained area and residue should be collected. For sand or vegetation cleaning, a berm may be constructed down slope that will collect the residue for disposal. All disposal residues should be done according to federal, state, and local regulations. In general, the technique used for collection of the oil/soap residue should be determined by the on site contractor based on the environment of the area to be cleaned and the equipment and materials available for collection. Cleanup residue should be collected and disposed of in accordance with local, state, and federal regulations. |
| VII. TOXICITY AND EFFECTIVENESS | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
a. Toxicity:
b. Effectiveness: |
| VIII. MICROBIOLOGICAL ANALYSIS |
|---|
| NA |
| IX. PHYSICAL PROPERTIES |
|---|
| 1. Flash Point: >93°C 2. Pour Point: +20°F 3. Viscosity: 3.1 cst @ 40°C 4. Specific Gravity: 1.024 @60°F 5. pH: 9.03 6. Surface Active Agents: PROPRIETARY 7. Solvents: PROPRIETARY 8. Additives: Yes 9. Solubility: 100 percent |
| X. ANALYSIS FOR HEAVY METALS, CYANIDE, AND CHLORINATED HYDROCARBONS | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|