PREMIER 99
TECHNICAL PRODUCT BULLETIN #SW-12
USEPA, OEM REGULATIONS IMPLEMENTATION DIVISION
ORIGINAL LISTING DATE: AUGUST 11, 1989
REVISED LISTING DATE: NOVEMBER 2, 1995
"PREMIER 99"
LISTING CHANGES PENDING; VERIFICATION BY MANUFACTURER AND EPA REQUIRED
I. NAME, BRAND, OR TRADEMARK |
---|
PREMIER 99 Type of Product: Surface Washing Agent (Water Based) (formerly D-41) |
II. NAME, ADDRESS, AND TELEPHONE NUMBER OF MANUFACTURER/CONTACT |
---|
Gold Coast Chemical Products 2357 Stirling Road Dania Beach, FL 33312 Phone: (954) 893-0044 Fax: (954) 893-8884 Email: noslime@goldcoastchemical.com (Mr. Eli Finkelberg or Ms. Maria Morris) |
III. NAME, ADDRESS, AND TELEPHONE NUMBER OF PRIMARY DISTRIBUTORS |
---|
Gold Coast Chemical Products 2357 Stirling Road Dania Beach, FL 33312 Phone: (954) 893-0044 Fax: (954) 893-8884 Email: noslime@goldcoastchemical.com (Mr. Eli Finkelberg or Ms. Maria Morris) |
IV. SPECIAL HANDLING AND WORKER PRECAUTIONS FOR STORAGE AND FIELD APPLICATION |
---|
1. Flammability: None 2. Ventilation: Adequate ventilation is needed if in closed environment. 3. Skin and eye contact; protective clothing; treatment in case of contact: Skin and eye contact: Detergents will defat skin and eyes. May cause irritation. Protective clothing: Use protective gloves for manual cleaning and splash goggles. Treatment in case of contact: If splashed on skin, wash with copious amounts of water. If ingested, drink diluted vinegar or lemon juice. Get medical attention. 4.a. Maximum storage temperature: 125ºF 4.b. Minimum storage temperature: 0ºF 4.c. Optimum storage temperature range: 0ºF - 75ºF Avoid freezing the product. If material freezes and separation is experienced, it should be warmed and mixed together. 4.d. Temperatures of phase separations and chemical changes: No separation expected down to 20ºF |
V. SHELF LIFE |
---|
Unopened material - at least 5 years is expected. Opened material - at least 2 years is expected. |
VI. RECOMMENDED APPLICATION PROCEDURE | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1.Application Method: Apply by spray, mop, or pressure washer, etc. Agitate severe spots. Rinse thoroughly for residue free surface. 2.Concentration/Application Rate: DILUTION TABLE
3.Conditions for Use: Water salinity, water temperature, types and ages of pollutants are not determined. |
VII. TOXICITY AND EFFECTIVENESS | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
a. Toxicity:
b. Effectiveness: NA |
VIII. MICROBIOLOGICAL ANALYSIS |
---|
NA |
IX. PHYSICAL PROPERTIES |
---|
1. Flash Point: 160ºF 2. Pour Point: NA 3. Viscosity: 15 cps 4. Specific Gravity: 1.01 5. pH: 10 - 11.5 6. Surface Active Agents: Active 8000* - Purity Chemical < 10% 7. Solvents: < 5% 8. Additives: < 5% 9. Solubility: Complete in Water *Note: Particular chemical composition of Active 8000 is considered by Purity Chemical as a trade secret. More detailed information can be given by Purity Chemical - Mr. Jim Palmer, 1800 NW 70th Ave., Miami, FL 33126, 1-800-654-0235, FAX (305) 592-2601. |
X. ANALYSIS FOR HEAVY METALS, CYANIDE, AND CHLORINATED HYDROCARBONS | ||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|