TOPSALL #30
TECHNICAL PRODUCT BULLETIN #SW-2
USEPA, OEM REGULATIONS IMPLEMENTATION DIVISION
ORIGINAL LISTING DATE: JANUARY 7, 1985
REVISED LISTING DATE: AUGUST 21, 1995
"TOPSALL #30"
(a/k/a SUPERALL #38)
| I. NAME, BRAND, OR TRADEMARK |
|---|
| Topsall #30 (a/k/a SUPERALL #38) Type of Product: Surface Washing Agent (Oil and Petroleum Cleaning Agent) (formerly #D-20) |
| II. NAME, ADDRESS, AND TELEPHONE NUMBER OF MANUFACTURER/CONTACT |
|---|
| TOPSALL#30 Stutton North Corporation P.O. Box 724 Mandeville, LA 70470 Phone: (985) 626-3900 Fax: (985) 674-0476 (Mr. David Anton) SUPERALL #38 Superall Products LLP P.O. Box 2954 Spring, TX 77383 Phone: (281) 351-4800 Fax: (281) 351-4855 E-mail: SuperAll (info@superall.com) Website: SuperAll Environmental LLC (https://www.superall.com) (Mr. Sammy Roberts II) |
| III. NAME, ADDRESS, AND TELEPHONE NUMBER OF PRIMARY DISTRIBUTORS |
|---|
| TOPSALL#30 Stutton North Corporation P.O. Box 724 Mandeville, LA 70470 Phone: (985) 626-3900 Fax: (985) 674-0476 (Mr. David Anton) SUPERALL #38 Superall Environmental LLC P.O. Box 2954 Spring, TX 77383 Phone: (281) 351-4800 Fax: (281) 351-4855 E-mail: SuperAll (info@superall.com) Website: SuperAll Environmental LLC (https://www.superall.com) (Mr. Sammy Roberts II) |
| IV. SPECIAL HANDLING AND WORKER PRECAUTIONS FOR STORAGE AND FIELD APPLICATION |
|---|
| 1. Flammability: TOPSALL #30 (a/k/a SUPERALL #38) is non-flammable 2. Ventilation: Normal type household ventilation is adequate for handling and storage. 3. Skin and eye contact; protective clothing; treatment in case of contact: In case of contact with eyes, wash thoroughly with large amounts of water. If irritation persists, seek medical attention. Use protective gloves for manual cleaning. 4.a. Maximum storage temperature: 120°F 4.b. Minimum storage temperature: 20°F 4.c. Optimum storage temperature range: 40°F to 100°F 4.d. Temperatures of phase separations and chemical changes: TOPSALL #30 (a/k/a SUPERALL #38) has a pour point of 20°F and a boiling point of 212°F. |
| V. SHELF LIFE |
|---|
| TOPSALL #30 (a/k/a SUPERALL #38) has a shelf life of not less than two years. |
| VI. RECOMMENDED APPLICATION PROCEDURE | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. Application Method: For general use, apply by spray, mop, etc. Agitate severe spots and rinse thoroughly for a residue-free surface. 2. Concentration/Application Rate: Dilute as noted below: DILUTION TABLE
*Rigs and platforms, bilges, decks, waterline scum, shop machinery and equipment. **Degasing tanks and barges, engine rooms and soot, oil stained concrete, petroleum based drilling muds. ***Black magic, Bunker C, crude oil, holding tanks, grease traps. DO NOT USE UNDILUTED ON COMPOSITION FLOORS, WATER BASE PAINTED SURFACES, OR ALUMINUM. 3.Conditions for Use: Recommended for cleaning petroleum fractions from decks, platforms, bilges, rigs, and other seagoing equipment, as noted above. |
| VII.TOXICITY AND EFFECTIVENESS | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
a. Toxicity:
NOTE: This toxicity data was derived using the concentrated product. See Section VI of this bulletin for information regarding the manufacturer's recommendations for concentrations and application rates for field use. b. Effectiveness: NA |
| VIII. MICROBIOLOGICAL ANALYSIS |
|---|
| NA |
| IX. PHYSICAL PROPERTIES |
|---|
| 1. Flash Point: > 212°F 2. Pour Point: 20°F 3. Viscosity: 30.53 SUS at 100°F 4. Specific Gravity: 1.06 at 70°F 5. pH: 12.6 6. Surface Active Agents: CONFIDENTIAL 7. Solvents: None 8. Additives: CONFIDENTIAL 9. Solubility: Miscible with water |
| X. ANALYSIS FOR HEAVY METALS, CYANIDE, AND CHLORINATED HYDROCARBONS | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|