WATER WORKS™ HEAVY DUTY DEGREASER CONCENTRATE (aka, HEAVY DUTY DEGREASER CONCENTRATE)

TECHNICAL PRODUCT BULLETIN #SW-69
USEPA, OEM REGULATIONS IMPLEMENTATION DIVISION
ORIGINAL LISTING DATE: SEPTEMBER 7, 2016
“WATER WORKS™ HEAVY DUTY DEGREASER CONCENTRATE”
(aka, HEAVY DUTY DEGREASER CONCENTRATE)

I. NAME, BRAND, OR TRADEMARK
WATER WORKS™ HEAVY DUTY DEGREASER CONCENTRATE (aka, HEAVY DUTY DEGREASER CONCENTRATE) Type of Product: Surface Washing Agent

II. NAME, ADDRESS, AND TELEPHONE NUMBER OF MANUFACTURER/CONTACT
Keteca USA, Inc. 4280 W. Opportunity Way Phoenix, AZ 85086 Phone: (602) 278-7789 Fax: (602) 535-1305 E-mail: Keteca USA Sales (sales@ketecausa.com) E-mail: Ms. Kathy Parks (kparks@ketecausa.com) Web site: Water Works by Keteca (https://ketecawaterworks.com) (Ms. Kathy Parks)

III. NAME, ADDRESS, AND TELEPHONE NUMBER OF PRIMARY DISTRIBUTORS
Keteca USA, Inc. 4280 W. Opportunity Way Phoenix, AZ 85086 Phone: (602) 278-7789 Fax: (602) 535-1305 E-mail: Keteca USA Sales (sales@ketecausa.com) Web site: Water Works by Keteca (https://ketecawaterworks.com) (Ms. Kathy Parks)

IV. SPECIAL HANDLING AND WORKER PRECAUTIONS FOR STORAGE AND FIELD APPLICATION
1. Flammability: Non-Flammable (DOT: Non-Hazardous) 2. Ventilation: No special requirements. 3. Skin and eye contact; protective clothing; treatment in case of contact: Avoid contact with eyes, slight irritation may result. Wear splash goggles or full face-shield and have eye washing equipment available in areas where potential is high for eye contact. Skin contact will not cause irritation in the majority of users. If eye or skin irritation occurs, flush with plenty of fresh water. No special precautions or additional protective equipment are required during handling or use. Water Works™ Heavy Duty Degreaser Concentrate is provided with a Safety Data Sheet. 4.a. Maximum storage temperature: 100°F continuous, 110°F up to 5 days, keep away from direct sun light. 4.b. Minimum storage temperature: 35°F 4.c. Optimum storage temperature range: >32°F to <100°F 4.d. Temperatures of phase separations and chemical changes: Stable and phase separation will not occur at temperatures within the storage temperature range.

IV. SPECIAL HANDLING AND WORKER PRECAUTIONS FOR STORAGE AND FIELD APPLICATION

1. Flammability: Non-Flammable (DOT: Non-Hazardous)
2. Ventilation: No special requirements.
3. Skin and eye contact; protective clothing; treatment in case of contact: Avoid contact with eyes, slight irritation may result. Wear splash goggles or full face-shield and have eye washing equipment available in areas where potential is high for eye contact. Skin contact will not cause irritation in the majority of users. If eye or skin irritation occurs, flush with plenty of fresh water. No special precautions or additional protective equipment are required during handling or use. Water Works™ Heavy Duty Degreaser Concentrate is provided with a Safety Data Sheet.
4.a. Maximum storage temperature: 100°F continuous, 110°F up to 5 days, keep away from direct sun light.
4.b. Minimum storage temperature: 35°F
4.c. Optimum storage temperature range: >32°F to <100°F
4.d. Temperatures of phase separations and chemical changes: Stable and phase separation will not occur at temperatures within the storage temperature range.

V. SHELF LIFE
12 months from date of manufacturer in unopened original packaging (as delivered). Containers should always remain closed when not in use to prevent contamination and evaporation.

VI. RECOMMENDED APPLICATION PROCEDURE
1. Application Method: Product may be applied to rocks, shoreline, and beaches for removal of oil. Select proper dilution depending on product types and contaminated material surface prior to application. For treatment of large areas, properly diluted product may be applied by spraying with a pressure washer, portable fire pump or any other suitable pump with seawater or freshwater suction that is equipped with a chemical inductor or feed pump. For smaller areas, properly diluted product may be applied with scrubber, mop, cloth or damp sponge. Apply liberally, adjusting dilution on site as necessary. 2. Concentration/Application Rate: For heavily weathered oil on rocks, applying concentrated or diluted solution at 5 parts water to 1 part product is recommended. For heavily weathered oil on beaches/sand, a diluted solution of 2 parts water to 1 part product is ideal. For tar balls, no dilution is necessary and applying product at full strength is recommended. For removing oil from vegetation, a diluted solution of 10-20 parts water to 1 part product is preferred. Product may be diluted with either saltwater or freshwater. Warmer waters (greater than 78°F) and/or good agitation during application will require less product. 3. Conditions for Use: Can be used in freshwater, estuarine, and marine environments at all temperatures. Prior to application, booms, oil skimmers, or other appropriate containment and collection mechanism should be deployed and operational. Collected product and oil mixture should be disposed of according to local, state, and federal regulations.

VI. RECOMMENDED APPLICATION PROCEDURE

1. Application Method: Product may be applied to rocks, shoreline, and beaches for removal of oil. Select proper dilution depending on product types and contaminated material surface prior to application. For treatment of large areas, properly diluted product may be applied by spraying with a pressure washer, portable fire pump or any other suitable pump with seawater or freshwater suction that is equipped with a chemical inductor or feed pump. For smaller areas, properly diluted product may be applied with scrubber, mop, cloth or damp sponge. Apply liberally, adjusting dilution on site as necessary.
2. Concentration/Application Rate: For heavily weathered oil on rocks, applying concentrated or diluted solution at 5 parts water to 1 part product is recommended. For heavily weathered oil on beaches/sand, a diluted solution of 2 parts water to 1 part product is ideal. For tar balls, no dilution is necessary and applying product at full strength is recommended. For removing oil from vegetation, a diluted solution of 10-20 parts water to 1 part product is preferred. Product may be diluted with either saltwater or freshwater. Warmer waters (greater than 78°F) and/or good agitation during application will require less product.
3. Conditions for Use: Can be used in freshwater, estuarine, and marine environments at all temperatures. Prior to application, booms, oil skimmers, or other appropriate containment and collection mechanism should be deployed and operational. Collected product and oil mixture should be disposed of according to local, state, and federal regulations.

VII.TOXICITY AND EFFECTIVENESS

a. Toxicity:

Material Tested	Species	LC50 (ppm)
WATER WORKS™ HEAVY DUTY DEGREASER CONCENTRATE	Menidia beryllina Mysidopsis bahia	68.70 96-hr 91.70 48-hr
No. 2 Fuel Oil	Menidia beryllina Mysidopsis bahia	11.53 96-hr 2.10 48-hr
ACCELL CLEAN® SWA & No. 2 Fuel Oil (1:10)	Menidia beryllina Mysidopsis bahia	14.60 96-hr 2.27 48-hr
Reference Toxicant (DDS)	Menidia beryllina Mysidopsis bahia	7.68 96-hr 5.27 48-hr

b. Effectiveness:
NA

VIII. MICROBIOLOGICAL ANALYSIS
NA

IX. PHYSICAL PROPERTIES
1. Flash Point (ASTM D-56): >212°F 2. Pour Point (ASTM D-97): 26ºF 3. Viscosity (ASTM D-445): 2.66 cst @ 40°C 4. Specific Gravity (ASTM D-1298): 1.0728 at 60°F 5. pH (ASTM D-1293): 9.4 6. Surface Active Agents: Proprietary surfactants 7. Solvents: None 8. Additives: None 9. Solubility: Soluble in water

X. ANALYSIS FOR HEAVY METALS, CYANIDE, AND CHLORINATED HYDROCARBONS

Compound	Concentration (ppm)
Arsenic	<0.001
Cadmium	<0.001
Chromium	<0.005
Copper	<0.01
Lead	0.0163
Mercury	<0.0002
Nickel	0.0167
Zinc	0.025
Cyanide	0.21
Chlorinated Hydrocarbons	6.22

WATER WORKS™ HEAVY DUTY DEGREASER CONCENTRATE (aka, HEAVY DUTY DEGREASER CONCENTRATE)

Emergency Response