Framework Development Overview
The Framework (formerly known as the Guidelines) for the assessment of environmental performance standards and ecolabels provide a transparent, fair, and consistent approach to assessing private sector standards and ecolabels for EPA’s Recommendations to federal purchasers.
How Was the Framework Developed?
Interagency Effort
In 2011, EPA, the General Services Administration (GSA), and other federal agencies, including the Department of Defense and the Department of Commerce, following several listening sessions with a wide range of stakeholders came together with the goal of a fair, consistent, and effective way to assess and use private sector standards and ecolabels in federal purchasing. The interagency group developed an initial draft Framework and tested the feasibility and appropriateness. This included conducting a survey of a subset of government and non-governmental environmental performance standards and ecolabel developers. Based on the results of the study and external stakeholder input from more than 30 listening sessions and discussions, EPA took the lead in completing the draft Framework and framing a pilot.
Public Comment
From November 20, 2013 through April 25, 2014, EPA received input from more than 75 individuals and organizations on its proposed Draft Framework for Product Environmental Performance Standards and Ecolabels for Voluntary Use in Federal Procurement to help federal purchasers select greener products and meet sustainability purchasing goals.
The majority of public comments supported EPA undertaking—with key external entity and stakeholder participation—additional work to further refine the Framework and test a potential approach to assessing standards and ecolabels.
Based on comments, Section II (Environmental Effectiveness) and Sections I, III, and IV of the Draft Framework were revised.
2015-2016 EPA Framework Pilot
EPA contracted with Resolve Inc. to convene a multi-stakeholder Governance Committee and purchase category-specific panels to develop and pilot test an approach in a few sectors. EPA chose the following three product categories to pilot: furniture, flooring (includes carpet), and paints/coatings.
These sectors were chosen because they meet some or all of the following criteria:
- Potentially significant environmental and/or human health impact (based on lifecycle assessments and hazard and risk assessments)
- Opportunity for environmental and/or human health improvement through private sector standards/ecolabels
- Significant volume of federal purchases
- Current federal sustainable acquisition mandates in the category are limited, out-of-date, and/or could be augmented with private sector standards
Product Category Panels
Each of the Product Category panels and the Service Sector Panel included a set of experts, with balanced participation from the following stakeholder groups: Producers, Users, Environmental and Public Health/Regulatory, and the Standards and Ecolabel Community.
The primary role of each of the three product category panels was to work collaboratively with other panel members to develop product-category-specific criteria for evaluating standards and ecolabels (based on the Framework), consider related issues such as scoring and weighting, and then review and provide comments on the assessment results.
The primary role of the Service Sector Panel was to help identify key issues and then make preliminary recommendations on the potential future application of the Framework to service sector standards and ecolabel.
The criteria for Panel membership included:
- Knowledge of the environmental and/or human health impacts of the particular product category.
- Experience working with diverse stakeholders towards consensus.
- Familiarity with the draft Framework and federal sustainable acquisition mandates.
- Familiarity with standards development and conformity assessment approaches.
- Ability to devote the necessary time to the panel.
Governance Committee (GC)
The GC included representatives from the panels (one from each of the four panels), elected by the panels, as well as additional individuals who were not Panel members, but instead focused on the pilot’s broader objectives while adding balance and credibility to the GC.
The primary roles of the Governance Committee (GC) were to: develop criteria and sources of evidence for Sections I, III, and IV of the Draft Framework; coordinate, guide, and advise the panels; ensure consistency among the panels where appropriate; make recommendations on key pilot phases; add insight and perspective on the pilot’s value and post-pilot scalability questions. As such, the GC played a key role supporting the pilot’s immediate goals, as well as built momentum and leadership beyond the pilot.
All applicants were asked to disclose any potential conflict of interest; a conflict of interest did not preclude participation, but transparency was essential.
Governance Committee Members:
- Angie Fyfe ICLEI Local Governments for Sustainability, USA
- Bill Perdue American Home Furnishings Alliance
- Brad Miller Business & Institutional Furniture Manufacturers Association (Furniture Panel Representative)
- Bridgett Luther Cradle to Cradle Products Innovation Institute
- Charleen Fain-Keslar State of California, Department of General Services, Procurement Division (Services Sector Panel Representative)
- David Alderman National Institute of Standards and Technology
- Deborah Prince Underwriters Laboratories Inc.
- Don Horn U.S. General Services Administration
- Jason Pearson Sustainable Purchasing Leadership Council
- Jeff Bradley American Wood Council
- Karyn Schmidt American Chemistry Council
- Kirsten Ritchie Gensler
- Linda Brown SCS Global Services
- Mark Petruzzi Green Seal (Paints, Coatings and Removers Panel Representative)
- Martha Stevenson World Wildlife Fund
- Reinaldo Figueiredo American National Standards Institute
- Sara Cederberg U.S. Green Building Council
- Saskia Anders Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH
- Shabnam Fardanesh U.S. Department of Energy
- Steven Baer thinkstep
- Timothy Smith University of Minnesota
- Wayne Rifer/Melanie Bowers Green Electronics Council
Paints/Coatings Panel Members:
- Boma Brown West Environmental Defense Fund
- Bradley Fleckner UL Environment
- Daniel Garza State of California – Department of General Services – Procurement Division
- David Rivkin Sustainable Methods Institute
- Doug Mazeffa Sherwin-Williams
- Elizabeth Wagner CalRecycle (California Department of Resources Recycling and Recovery)
- Joanne Rodriguez Tremco, Inc.
- Karl Bruskotter City of Santa Monica
- Kate Lewis U.S. Department of Agriculture
- Keleigh McAllister DSM
- Kelly Scanlon Environmental Protection Agency, OAR, Indoor Environments Division
- Mark Petruzzi Green Seal (Governance Committee Representative)
- Peter Pohlot Brookhaven National Laboratory – U.S. Department of Energy
- Raymond Paulson U.S. Department of Navy
- Rebecca Stevens U.S. General Services Administration – Public Buildings Service
- Stephen Wieroniey American Coatings Association
- Stowe Beam SCS Global Services
Flooring Panel Members:
- Alicia Culver Center for Environmental Health
- Annika Terrana World Wildlife Fund, Inc.
- Bill Brodt NASA
- Bill Freeman Resilient Floor Covering Institute
- Bill Griese Tile Council of North America
- Brian Sause Hardwood Plywood and Veneer Association
- Fareed Ferhut CalRecycle (California Department of Resources Recycling and Recovery)
- James Connelly International Living Future Institute
- John Forbes National Wood Flooring Association
- Larissa Oaks U.S. Green Building Council
- Nadine Block Sustainable Forestry Initiative Inc.
- Paul Firth UL
- Sandra Cannon U.S. Department of Energy
- Sarah Morris-Benavides Ames Laboratory
- Tad Radzinski GreenCircle Certified, LLC
Furniture Panel Members:
- Alex Stone Washington Department of Ecology
- Brad Miller Business & Institutional Furniture Manufacturers Association (Governance Committee Representative)
- Brianna Durkin Battelle Memorial Institute, PNWD
- Chris Geiger San Francisco Department of the Environment
- Fallight Xu TÜV Rheinland
- Jessica Slomka NSF International
- Josh Hosen HPVA Laboratories
- Judy Levin Center for Environmental Health
- Laureen Burton Environmental Protection Agency, Office of Radiation and Indoor Air
- Lynda Rankin Province of Nova Scotia, Internal Services Department, Procurement Services
- Mike Italiano Institute for Market Transformation to Sustainability
- Rita McBride U.S. General Services Administration – Heartland Acquisition Center
- Robert Luedeka Polyurethane Foam Association
- Susan Inglis Sustainable Furnishings Council
- Susan Klosterhaus Cradle to Cradle Products Innovation Institute
- Yalmaz Siddiqui formerly with Office Depot (now with MGM)
Service Sector Panel Members:
- Brennan Conaway U.S. General Services Administration
- Charleen Fain-Keslar State of California, Department of General Services, Procurement Division (Governance Committee Representative)
- Charles Franklin Akin Gump Strauss Hauer & Feld, LLP
- Christina Macken Sustainable Purchasing Leadership Council
- Colleen Olphert Boston College Center for Corporate Citizenship
- David Burdick Sustainable Steps
- Heather Burns Connecticut Sustainable Business Council
- Lindsay Arell Arell Logic
- Marcia Kinter Specialty Graphic Imaging Association
- Margaret Whittaker ToxServices LLC
- Mark Sajbel U.S. Department of Agriculture
- Priya Patel Canadian Standards Association
- Stephen Ashkin Green Cleaning Network & The Ashkin Group LLC
- Thomas Witt Code Earth
- Tobias Schultz SCS Global Services
- Todd Jones Center for Resource Solutions
- William Balek ISSA
Lessons Learned and Updated Framework
Based on lessons learned from the initial pilot assessments, EPA made slight adjustments to and published the pilot Framework (pdf) in 2016 (formerly known as the Guidelines). The multi-stakeholder pilot panel and governance committee members shared their feedback on and support for EPA providing a more streamlined approach to assessing standards and ecolabels post-pilot.
Following the issuance of the Executive Order 14057 on Catalyzing Clean Energy Industries and Jobs through Federal Sustainability and the Federal Sustainability Plan in December 2021, which directs the federal government to purchase sustainable products and services identified or recommended by EPA, the Agency released an updated Framework (pdf) based on this pilot feedback as well as the 5+ years of implementing the Recommendations of Specifications, Standards, and Ecolabels for Federal Purchasing.
Additional minor edits were made to clarify the criteria addressing product registries to reflect public comments submitted during the mid-2022 Information Collection Request approval process. The updated Framework also phases in some additional eligibility criteria for standards and ecolabels to be included in the EPA Recommendations.
View the full summary of changes from the 2016 pilot version (pdf).
Historical Documents
- Final Pilot Framework (pdf) (2016)
- EPA’s Draft Options Paper for the Pilot Governance Committee (October 2016).
- November 2013 Federal Register Notice on the Draft Guidelines (now known as the "Framework").
- Technical Questions and Answers regarding the Draft Framework (from November 2013).
- Draft Framework – Sections I, III, and IV (November 2013) and Revised Section II (December 2014).
- Briefing on the Draft Framework webinar recording (December 2014).
- Federal Register Notice to launch a pilot to assess standards and ecolabels against the Draft Framework (formerly known as Guidelines) in three product categories: furniture; flooring; and paints/coatings (March 19, 2015).
- Independent Assessment Entity (IAE) Initial Pilot Assessment Findings and Recommendations.
- Final Guidance on Environmentally Preferable Purchasing (Sept. 14, 1999)