General Duty Clause Fact Sheet
Section 112(r)(1) of the Clean Air Act, also known as the General Duty Clause, makes the owners/operators of facilities with regulated hazardous substances responsible for managing chemicals safely.
- [Spanish] The General Duty Clause Fact Sheet (pdf)
- [Vietnamese] The General Duty Clause Fact Sheet (pdf)
EPA 550-F-20-002
April 2020
Under the Clean Air Act Section 112(r)(1), the General Duty Clause states: “The owners and operators of stationary sources producing, processing, handling or storing such substances [i.e., a chemical in 40 CFR part 68 or any other extremely hazardous substance] have a general duty [in the same manner and to the same extent as the general duty clause in the Occupational Safety and Health Act] to identify hazards which may result from (such) releases using appropriate hazard assessment techniques, to design and maintain a safe facility taking such steps as are necessary to prevent releases, and to minimize the consequences of accidental releases which do occur.”
What is the general duty clause?
In the Clean Air Act Amendments of 1990, Congress enacted Section 112(r)(1), also known as the General Duty Clause, which makes the owners and operators of facilities that have regulated and other extremely hazardous substances responsible for ensuring that their chemicals are managed safely. Facilities have been required to comply with GDC since November 1990.
Who is covered?
The General Duty Clause applies to any stationary source producing, processing, handling, or storing regulated substances or other extremely hazardous substances. “Other extremely hazardous substances” are any chemicals listed in 40 CFR part 68, or any other chemicals, which may be considered extremely hazardous.
What does the general duty clause involve?
In the Clean Air Act Amendments of 1990, Congress enacted Section 112(r)(1), also known as the General Duty Clause, which makes the owners and operators of facilities that have regulated and other extremely hazardous substances responsible for ensuring that their chemicals are managed safely. Facilities have been required to comply with GDC since November 1990.
Who is covered?
The General Duty Clause applies to any stationary source producing, processing, handling, or storing regulated substances or other extremely hazardous substances. “Other extremely hazardous substances” are any chemicals listed in 40 CFR part 68, or any other chemicals, which may be considered extremely hazardous.
What does the general duty clause involve?
Facilities subject to the General Duty Clause are, among other things, responsible for:
- Knowing the hazards posed by the chemicals and assessing the impacts of possible releases,
- Designing and maintaining a safe facility to prevent accidental releases, and
- Minimizing the consequences of accidental releases that do occur.
What is the chemical accident prevention program and how does it differ from the general duty clause?
Clean Air Act Section 112(r) also established the Chemical Accident Prevention Program dedicated to recognizing hazards and preventing accidents. It differs from the GDC in that it requires facilities that use listed toxic or flammable chemicals above certain thresholds to implement a specified set of accident prevention and emergency response program elements, and to submit a document called a risk management plan to EPA. The RMP summarizes a regulated facility’s hazard assessment, emergency response program, and accident prevention program information. Most of the information in a facility’s RMP is available to the public.
How do I meet the clause's obligations?
It is important to understand that the General Duty Clause is not a regulation and compliance cannot be checked against a regulation or submission of data. The General Duty Clause requires you to identify hazards your facility may present from accidental releases of hazardous substances, design and maintain a safe facility, and minimize the consequences of accidental releases which do occur. Generally, among other things, you should:
(1) Adopt or follow any relevant industry codes, practices or consensus standards (for the process or facility as a whole as well as for particular chemicals or pieces of equipment),
(2) Be aware of unique circumstances of your facility which may require a tailored accident prevention program, and
(3) Be aware of accidents and other incidents in your industry that indicate potential hazards.
Obligation examples
- A facility installed a water-based fire suppression system in storage areas that contained water-reactive chemicals. This created a clearly hazardous condition. The General Duty Clause required the facility to install a fire suppression system that was compatible with water reactive chemicals.
- Preventing and mitigating accidental releases related to known equipment failure scenarios is a GDC obligation.
Frequent questions
- I don’t have to submit an RMP because I lowered my thresholds – and I believe that I lowered my risk. Am I still subject to the General Duty Clause?
- Yes. If you use a regulated substance or any other extremely hazardous substance in any amount you are subject to the GDC.
- How can I find out what GDC inspectors are looking for at my facility?
- How can I find out about accidents and recognized hazards in my industry sector?
- Your trade association is a good place to start. OSHA and the Chemical Safety & Hazard Investigation Board periodically issue hazard bulletins and accident investigation reports. EPA also issues Chemical Safety Alerts and Enforcement Alerts on recognized hazards. Additionally, the United States Coast Guard’s National Response Center is a useful first stop for tracking accidents.
- How has OSHA’s GDC been applied?
- Similar to the GDC of the Clean Air Act, OSHA’s GDC applies when: (a) an employer fails to render a workplace free of hazard; (b) the hazard is recognized either by the employer or generally within the employer’s industry; (c) the hazard causes or is likely to cause death or serious harm; and (d) there are feasible means by which the employer can eliminate or materially reduce the hazard.
- What are the penalties for non-compliance with the GDC?
- The Clean Air Act Section 113(d) currently allows EPA to assess penalties of up to a maximum of $48,192, per day of violation, and will make subsequent annual adjustments in order to account for inflation.
How do I find more information on the general duty clause, chemical safety alerts, or the risk management program?
- EPA Hotline: Risk Management Plan Information Center Phone: 800-424-9346 (select option #6 from menu) Toll Free: 703-348-5070 in the Washington, DC Area / International Hours: 10:00 a.m. – 5:00 p.m. EST, Monday – Friday, Closed Federal Holidays
- Websites