Reinforced Plastic Composites Production: National Emission Standards for Hazardous Air Pollutants
On this page:
Rule Summary
This action promulgates national emissions standards for hazardous air pollutants (NESHAP) for new and existing reinforced plastic composites production facilities. The NESHAP regulate production and ancillary processes used to manufacture products with thermoset resins and gel coats.
Reinforced plastic composites production facilities emit hazardous air pollutants (HAP), such as styrene, methyl methacrylate (MMA), and methylene chloride (dichloromethane). These HAP have adverse health effects including headache, fatigue, depression, irritation of skin, eyes, and mucous membranes.
Methylene chloride has been classified as a probable human carcinogen.
The NESHAP will implement section 112(d) of the Clean Air Act (CAA) by requiring all major sources in this category to meet HAP emissions standards reflecting the application of the maximum achievable control technology (MACT). We estimate the final NESHAP will reduce nationwide emissions of HAP from these facilities by approximately 7,682 tons per year (tpy) (43 percent).
Rule History
03/20/2020 - Final Risk and Technology Review Amendments
05/17/2019 - Proposed Risk and Technology Review Amendments
08/25/2005 - Direct Final Rule; Amendments
08/25/2005 - Proposed Rule; Amendments
04/21/2003 - Final Rule
08/02/2001 - Proposed Rule
Additional Resources
Background Information Document
Economic Impact Analysis of the Final Reinforced Plastic NESHAP, August 2002