Alternate Test Procedures: Questions and Answers
Answers about the Alternate Test Procedure (ATP) program for Clean Water Act (CWA) analytical methods.
- How do I ask EPA to Review my Method under the CWA ATP Program?
- How do I Write a Method in EPA Format?
- Is a Method that is Reviewed under the CWA ATP Program an Approved Method?
- Are there any Exceptions to Rulemaking before Use of an Alternate Test Procedure?
- Why does EPA have Two Validation Protocols for Chemical Methods?
- What is "136.6" Method Flexibility?
- Does 136.6 Flexibility to Modify Methods only apply to CWA Chemical Methods?
- Where can I find the "Guide to Method Flexibility" Document?
- How does EPA Determine the Equivalency of an ATP for a Method Defined Parameter?
- Additional Information
How do I ask EPA to Review my Method under the CWA ATP Program?
EPA has provided detailed guidance about the kind of information it needs to evaluate methods for potential approval. The Agency conducts a notice-and-comment rulemaking process for methods evaluated under the ATP program, before they are incorporated into the Part 136 regulations. The types of information required for an application are described in three protocol documents: two for chemical methods, and one for microbiological methods.
Note: EPA does not have an ATP review protocol for toxicity testing under EPA's Whole Effluent Toxicity (WET) program.
Before submitting a method to EPA for an ATP review, a developer confers with EPA to design a method validation study. This study tests the new or modified method in several representative matrices and independent laboratories. The method also must also be written in a standard format that includes all of the steps in an approved method, such as sample and data handling, and quality assurance requirements.
How do I Write a Method in EPA Format?
Refer to Guidelines and Format for Methods to be Proposed at 40 CFR Part 136 or Part 141 (1996). EPA prepared this document to promote consistency among analytical methods and to streamline the method promulgation process.
Is a Method that is Reviewed under the CWA ATP Program an Approved Method?
No, first the method must be reviewed and found to be complete and supported by the documentation, then the method must be approved through rulemaking before the method may be added to 40 CFR Part 136 as an approved CWA method.
Are there any Exceptions to Rulemaking before Use of an Alternate Test Procedure?
Yes, but only for wastewater methods. Approval for nationwide use requires a rulemaking process. In the interim, a facility may apply to an EPA Region for a limited-use ATP approval letter, i.e. for use at that facility. Generally it is not necessary for the limited-use ATP applicant to submit data, or do a side-by-side comparison, if the method has already been reviewed for nationwide use under the CWA ATP program which requires multi-lab and comparability data and the review has resulted in a recommendation for inclusion in Part 136.
Why does EPA have Two Validation Protocols for Chemical Methods?
One protocol covers modifications to approved methods that require EPA review and subsequent approval through rulemaking. Validation procedures for these modified methods are described in the "ATP Method" validation protocol.
The other protocol covers methods that use a new determinative technique, which usually means that the method uses a detector different from any detector used in existing approved methods for that pollutant. Validation procedures for these new methods are described in the "New Method" validation protocol.
New methods and ATP methods (i.e., a modification to an approved method) must be approved through rulemaking before nationwide use.
What is "136.6" Method Flexibility?
Many approved methods provide the flexibility to modify and use that method without prior approval of the modification. In 2007, EPA amended the CWA Methods regulations at 40 CFR 136.6 to describe additional (and to clarify existing) flexibility to modify any Part 136 chemical method without prior review. Please review those allowances for flexibility before submitting an ATP application.
- Refer to Flexibility to Modify CWA Methods memo (November 2007)
Does 136.6 Flexibility to Modify Methods only apply to CWA Chemical Methods?
Yes. This flexibility does not apply to drinking water methods, or to CWA microbiological or biological methods.
Where can I find the "Guide to Method Flexibility" Document?
- Guide to Method Flexibility (1996)
How does EPA Determine the Equivalency of an ATP for a Method Defined Parameter?
EPA finalized revised chemical ATP and New Method protocols in 2018 to include guidance for evaluating the comparability of test procedures to be considered for use under the Clean Water Act program that measure method defined parameters regulated at 40 CFR Part 136. The revised protocols include Appendix H focused on the amount and type of data (including QC) that will be needed to establish comparability of the ATP or new method to the approved Part 136 method(s) and the statistical procedures that will be used to evaluate comparability.
EPA also encourages Voluntary Consensus Standards Bodies Examples of VCSBs are the "Standard Methods" Committee and ASTM International. (VCSBs) to consider this guidance when submitting methods to be considered for approval at Part 136. EPA considers methods from VCSB’s and other federal agencies under National Technology Transfer and Advancement Act (NTTAA) for inclusion in Part 136. EPA will use the guidance included Appendix H of the revised protocols to evaluate equivalency of all ATPs and new methods for measurement of method defined parameters to be considered for approval at Part 136. EPA will continue to accept requests to evaluate new ATP applications for method defined parameters including those with a different determinative step than the existing methods in Part 136 in the interim while the protocols are being completed. However, parties should be aware that EPA may delay its final determinations on such new requests and may request additional data as the revised protocols are developed and the data requirements are clarified.
Additional Information
For additional information, please email Lemuel Walker (walker.lemuel@epa.gov) or call 202-566-1077.